Rebug Toolbox é um aplicativo projectado para completar a operação completa da Rebug REX firmwares Edition, mas também é compatível com mais atual 3.55-> 4,76 CEX / DEX CFW (algumas opções não estão disponíveis). Além de exercer a CEX / DEX EID0 e LV2 Kernel Trocando também em um servidor de FTP e é embalado com um monte de outras ferramentas úteis. Nota:
Baixar: [Tens de ter uma conta e sessão iniciada para poderes visualizar este link]

SYSTEM

* SYSTEM INFORMATION:
Displays Firmware version, Toolbox version, IP address, current LV2 Kernel and Target ID type and free HDD space.

* QUIT:
Quits Toolbox and returns you to PS3 XMB.

* RESTART SYSTEM:
Perform either a Full or Soft reboot od the PS3 system.

Soft (LV2 Reboot Only)
Full (On/Off Cycle)

Boot OtherOS:
Boot OtherOS with either your currently selected LV1 patches or easily apply ALL LV1 patches and boot.

Boot (LV1 Patches: Apply All)
Boot (LV1 Patches: Use current)

Turn Off System:
Shut down your PS3.


SELECTOR

* SYSTEM MODE:
Switches between NORMAL and REBUG mode

NORMAL mode which uses the DEBUG XMB is the default mode after installing Rebug.

REBUG mode sets the PS3 to the latest available version spoof (updatable in the future) and allows swapping between RETAIL and DEBUG XMB.

XMB OPERATION MODE:
This option only works in REBUG mode and lets you select either the RETAIL or DEBUG XMB.

* DEBUG MENU TYPE:
Gives you the choice of the CEX QA (retail) or DEX (debug) Debug Settings menu.


* LV1 PATCHES

A collection of LV1 patches that can be used for better compatibility with some PS3 tools. Any combination of these patches can be applied before booting OtherOS.


DEX/CEX

* SWAP LV2 KERNEL:
Swaps between CEX and DEX LV2 Kernel. This option will only work if your Target ID is set to DEX

* REWRITE TARGET ID IN FLASH:
This option requires you have a valid NOR/NAND dump named correctly on dev_usb000. Use EXPORT FLASH TO FILE function to dump your NOR/NAND to dev_usb000 and then use c2d.exe to convert your dump to DEX.

Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb) or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN (16mb) or DEX-FLASH.EID0.NANDBIN (239mb or 256mb)

Once you have prepared your NOR/NAND dumps place them on a USB device and connect it to dev_usb000.

Now that you have your valid dumps named properly and connected to dev_usb000 it is a simple as selecting the option and following the onscreen prompts. Takes less than 10secs once you have your dumps prepared.

* EXPORT FLASH TO FILE:
Backup your current NOR/NAND to file on dev_usb000. Takes about 45secs for NAND

UTILITIES

* TOGGLE QA:
Enable/Disable QA flag. Enable for easy downgrade and other extra features on all 3.55/4.21/4.30/4.31 CFW.

* TOGGLE RECOVERY MODE:
Enable/Disable Recover Mode flag. When enabled your PS3 will reboot into Recovery Mode.

* TOGGLE PRODUCT MODE:
Enable/Disable Product Mode flag. When enabled your PS3 will reboot into Factory Service Mode. This option is only available for 3.55 CFW for safety reasons.

* LOAD LV2 KERNEL:
Load lv2_kernel.self.[KERNEL_NAME] from USB or /dev_hdd0.

* BACKUP/RESTORE XREGISTRY:
Backup or Restore the PS3 system settings from USB.

* RESIZE VFLASH/NAND REGIONS:
Resize VFLASH/NAND Region 5 to allow install of OtherOS.

* INSTALL PETITBOOT:
Install Petitboot to VFLASH/NAND Region 5 from USB.

* SET GAMEOS BOOT FLAG:
Sets the GameOS boot flag. Use this if your PS3 is having trouble booting PS2 titles after running OtherOS or is accidently sending you back to OtherOS when trying to enter recovery mode.

* CREATE PACKAGES FOLDER ON PS3:
Create /dev_hdd0/packages folder or your PS3 to be used with Package Manager.

* EXPORT HYPERVISOR LV1 MEMORY:
Save LV1 memory to dev_usb000 or dev_usb006 or dev_hdd0 if usb is not found.

* EXPORT GAMEOS LV2 MEMORY:
Save LV2 memory to dev_usb000 or dev_usb006 or dev_hdd0 if usb is not found.

* EXPORT FLASH TO FILE:
Backup your current NOR/NAND to file on dev_usb000. Takes about 45secs for NAND

* CHANGE ACTIVE PS3ID:
Spoof IDPS in LV2 memory. Choose from Use EID0 or Use EID5. EID5 will spoof your original CEX IDPS allowing you to connect to PSN if your PS3 is running REBUG REX EDITION firmware in DEX mode.


* OTHER TOOLBOX FEATURES:

L3 changes clock/temperature display

L2+R2 enable screensaver

START+R2 take a raw rgb screenshot

Remote-play via PSP/PSVITA

Auto-turn-off if idle for 1 hour

Telnet to PS3 ip at port: 8080

FTP access with writable dev_flash mounted as dev_rebug
(port: 21, user: anonymous, password: (anything))


IMPORTANT INFORMATION

QA SUPPORT

QA is supported in all REBUG REX EDITIONS but at this point in time we are unable to set the QA Token from GameOS on 3.55+ firmware.

It is good practice to enable QA in 3.55 before updating to any CFW not just REBUG.


OTHEROS++ SUPPORT

OtherOS++ is supported by all REBUG REX EDITIONS and will detect your existing OtherOS HDD partition.

However none of the REBUG REX EDITIONS have emer_init.self patched (create smaller GameOS partition). We are working on a solution to this from GameOS.

In the meantime if you do want to create an OtherOS partition you have two options:

1: Use a 3.55 firmware that already has emer_init.self patched to the size you want.
2: Patch REBUG 3.55.3 REX EDITION in PS3MFW Builder

If you choose option 2 we highly recommend that you ONLY patch emer_init.self. Also the resulting PUP will only be able to be installed on 3.55 firmware as the spkg_hdr will be mismatched.

One final thing to note about OtherOS on 4.21.1 is that it function is slightly reduced at the moment due to the fact that we are not able to map memory like in 3.55 and below. The affected modules are ps3ram and ps3sbmmio.

Hopefully this problem can be addressed without having to release another firmware.